Lateral Turning Mattress
Made In Taiwan
Technical Specification:
Suitable for patients in medium to high risk of pressure injuries
30° of lateral turning therapy to enhance pressure relief
3-in-1 therapy available for individual healthcare plans with effortless patient repositioning
Designed for use in the acute sector
Enhancing Pressure Relief by 30° of Bilateral Turning
Bilateral turning can significantly reduce interface pressure on patient´s body whilst increase capillary circulation. *1*2
30 degrees of turning not only complies with clinical guidelines but also provides optimal comfort.*3
Effective Pressure Relief by Bilateral Turning
The pressure mapping showcases a proven pressure relief off patient´s body by 30° of bilateral turning.
Effortless, 3-in-1 Therapy Solutions
Turning, Alternating and Continuous Low-Pressure modes to tailor to individual pressure care plans
Patient Protection Level Up
The side bolsters reduce the risk of entrapment and accidental falling out of bed, also support patient´s arms while in turning therapy
4-way Stretch Cover
Antimicrobial
Low friction and shear
Vapour permeable, water resistant
High-flame retardant
Seat Inflation
Offering extra support in sacral area when in during sitting position
Cable Management
Cable management for a safety operational environment
Transport Mode
Mattress remain to be a static surface for more than 6 hours during power failure and 8 hours for patient transfer
Model Pro-care Turn (5’’ Replacement)
Pump Dimensions 34.1 x 16.5 x 26.0 cm
Weight 4.5 kg / 9.9 lbs
Case Material Flame Retardent ABS
Supply Voltage AC 230V, 50Hz
Operating Cycle Time 10, 15, 20, 25 min.
Dwell Time 10, 20, 30, 60 min.
Mattress Dimensions 200 x 90 x 13 cm, side bolster 25 cm
Cell Height 13 cm cells with turning cells on the bottom from 4th to 12th
Weight 11.4 Kg / 25 lbs
Cover Material 4-way stretch
Cell Material TPU
Maximum Patient Weight 180 kg / 397 lbs
Flame Retardant Standards EN 597-1 & EN 597-2
Overview
- Category : Medical Services
Features:
- Lateral Turning Mattress
- Made In Taiwan
- Technical Specification:
- Suitable for patients in medium to high risk of pressure injuries
- 30° of lateral turning therapy to enhance pressure relief
- 3-in-1 therapy available for individual healthcare plans with effortless patient repositioning
- Designed for use in the acute sector
- Enhancing Pressure Relief by 30° of Bilateral Turning
- Bilateral turning can significantly reduce interface pressure on patient´s body whilst increase capillary circulation. *1*2
- 30 degrees of turning not only complies with clinical guidelines but also provides optimal comfort.*3
- Effective Pressure Relief by Bilateral Turning
- The pressure mapping showcases a proven pressure relief off patient´s body by 30° of bilateral turning.
- Effortless, 3-in-1 Therapy Solutions
- Turning, Alternating and Continuous Low-Pressure modes to tailor to individual pressure care plans
- Patient Protection Level Up
- The side bolsters reduce the risk of entrapment and accidental falling out of bed, also support patient´s arms while in turning therapy
- 4-way Stretch Cover
- Antimicrobial
- Low friction and shear
- Vapour permeable, water resistant
- High-flame retardant
- Seat Inflation
- Offering extra support in sacral area when in during sitting position
- Cable Management
- Cable management for a safety operational environment
- Transport Mode
- Mattress remain to be a static surface for more than 6 hours during power failure and 8 hours for patient transfer
- Model Pro-care Turn (5’’ Replacement)
- Pump Dimensions 34.1 x 16.5 x 26.0 cm
- Weight 4.5 kg / 9.9 lbs
- Case Material Flame Retardent ABS
- Supply Voltage AC 230V, 50Hz
- Operating Cycle Time 10, 15, 20, 25 min.
- Dwell Time 10, 20, 30, 60 min.
- Mattress Dimensions 200 x 90 x 13 cm, side bolster 25 cm
- Cell Height 13 cm cells with turning cells on the bottom from 4th to 12th
- Weight 11.4 Kg / 25 lbs
- Cover Material 4-way stretch
- Cell Material TPU
- Maximum Patient Weight 180 kg / 397 lbs
- Flame Retardant Standards EN 597-1 & EN 597-2
